Lincoln Electric IM707 Commander 500 - Manual (Page 28)

K1768-2 Dual Output Meters and Gauges - Dual out-
put meters provide preset ability of voltage for wire
welding and current for stick welding. Measures b o t h
current and voltage when welding. Gauges include:
battery ammeter, engine temperature, and engine oil
pressure. Fuel gauge is not available in kit form.
K1816-1 Full KVA Adapter Kit - Plugs into the
120/240v NEMA 14-50R receptacle on case front
(which accepts 4-prong plugs) and converts it to a
NEMA 6-50R receptacle, (which accepts 3-prong
plugs.
K1858-1 Service Indicator Kit - Provides a GO / NO-GO visu-
al indication of air cleaner element useful service life. Filter ser-
vice based on restriction readings allows the longest life possible
from the filter and best engine protection. (Cannot be used with
K887-1 Ether Start Kit at the same time.)
Pipe Thawing with an arc welder can cause fire,
explosion, damage to electric wiring or to the arc
welder if done improperly. The use of an arc welder
for pipe thawing is not approved by the CSA, nor is
it recommended or supported by Lincoln Electric.
------------------------------------------------------------------------
C-1 ACCESSORIES C-1
OPTIONAL FIELD INSTALLED
ACCESSORIES
K802N POWER PLUG KIT - Provides a plug for each receptacle.
K857 25 ft. (7.5 m) or K857-1 100 ft. (30.4 m) REMOTE CON-
TROL - Portable control provides same dial range as the output
control on the welder from a location up to the specified length
from the welder. Has convenient plug for easy connection to the
welder. The COMMANDER 500 CUMMINS is equipped with a 6
pin connector for connecting the remote control.
K704 ACCESSORY SET - Includes 35 feet (10 m) of
electrode cable and 30 feet (9 m) of work cable, head-
shield, work clamp and electrode holder. Cable is rated
at 500 amps, 60% duty cycle.
(K953-1) TRAILER - Two-wheeled trailer with optional
fender and light package. For highway use, consult applicable
federal, state, and local laws regarding possible additional
requirements. There is a choice of 2 hitches, a fender & a light
package. Order:
K953-1 Trailer
K958-1 Ball Hitch
K958-2 Lunette Eye Hitch
K959-1 Fender & Light Kit
K965-1 Cable Rack
(K957-1) TRAILER - Two-wheeled trailer for in-plant and
yard towing at speeds under 20 mph only.Order:
K957-1 Trailer
K958-1 Ball Hitch
K958-2 Lunette Eye Hitch
K959-2 Fender & Light Kit
K965-1 Cable Rack
K887-1 ETHER START KIT - Provides maximum cold weath-
er starting assistance for frequent starting below 25
o F(-4 o C).
Required Ether tank is not provided with kit. (Cannot be used
with K1858-1 Service Indicator Kit at the same time.)
K1847-1 SPARK ARRESTOR KIT - Easily mounts to standard
muffler.
K949-2 OIL DRAIN KIT - Includes ball valve, hose and clamp.
K1690-1 (1 Duplex) GFCI Kit - Includes one UL approved
115V ground fault circuit interrupter duplex type receptacle
with cover and installation instructions. Replaces the factory
installed 115V duplex receptacle. The receptacle of the GFCI
duplex is rated at 20 amps, the maximum total current from the
GFCI duplex is limited to 20 amps. Two kits are required.
COMMANDER 500 CUMMINS
WARNING