Lincoln Electric IM830 EAGLE 10,000 - Manual (Page 22)

C-1 ACCESSORIES C-1
EAGLE 10,000
OPTIONAL EQUIPMENT
(Field Installed)
K957-1 HEAVY DUTY, TWO WHEEL TRAILER FOR
SMALL WELDERS - For road, off-road and in-plant
and yard towing. (For highway use, consult applicable
federal, state and local laws regarding requirements
for brakes, lights, fenders, etc.)
Order
K957-1 Trailer
K958-1 Ball Hitch
K958-2 Lunette Eye Hitch
K959-2 Fender & Light Kit
K965-1 Cable Storage Rack
K889-2 & -3 Two-Wheel Undercarriage - For moving
by hand. Overall Width 29 in (.74m) Both have pneu-
matic tires. Puncture proof tires included with K889-3.
K1631-1 Puncture Proof Wheel Kit - For converting
K889-2 or K933-1 to puncture proof pneumatic tires.
K893-1 Caster for Undercarriage - Mounts to the
front of the K889-2 or 3 to allow easy movement on
smooth surfaces. Includes 6” diameter hard rubber
wheel and convenient toe-on, toe-off locking brake.
K933-1 Four Wheel Undercarriage - For Hand
Moving. Rear pneumatic tires, front molded wheels.
K934-1 Cylinder Brackets - For use with K933-1. For
transporting one welding gas cylinder.
K1737-1 FOUR WHEEL ALL-TERRAIN UNDER-
CARRIAGE - For moving by hand at construction
sites. Heavy duty puncture resistant pneumatic tires.
K1770-1 UNDERCARRIAGE (FACTORY) - For mov-
ing by hand on a smooth surface. One or two gas
cylinders can be mounted on the rear of the undercar-
riage with the installation of K1745-1 Cylinder
Holder(s). Heavy duty puncture resistant pneumatic
tires and front caster.
K1745-1 GAS CYLINDER HOLDER
Holds Welding Gas Cylinder for use on K1770-1
Undercarriage. One or two may be installed on an
undercarriage.
K1788-1 ROLL CAGE - Gives added damage protection.
Attaches to K1737-1, K1770-1, and K957-1.
K886-1 Canvas Cover -To protect the EAGLE 10,000
when not in use. Made from attractive red canvas
material which is flame retardant, mildew resistant,
and water repellent.
K802-R Power Plug Kit- provides four 120V plugs
rated at 15 amps each and one dual voltage, Full
KVA plug rated at 120/240V, 50 amps.
K802-N Power Plug Kit - Provides four 120V plugs rated at 20
amps each and one dual voltage, full KVA plug rated at 120/240V,
50 amps.
K704 Accessory Kit - Includes 35 ft (10.7m) 2/0 AWG electrode
cable, 30 ft. (9.1m) 2/0 AWG work cable, headshield with filter plate,
work clamp and electrode holder. 400 amps capacity.
K875 Accessory Kit -Includes 20 ft (6.1m) #6 electrode cable with
lug, 15 ft. (4.6 m) #6 work cable with lugs,headshield with filter
plate, work clamp and electrode holder and sample pack of mild
steel electrode, 150 Amp Capacity.
K894-1 Spark Arrester Kit - Includes a heavy gauge steel,
approved spark arrester and clamp for easy mounting to muffler
exhaust pipe.
K1690-1 GFCI RECEPTACLE KIT - Includes one UL approved 120V
ground fault circuit interrupter duplex type receptacle with cover and
installation instructions. Replaces the factory installed 120V duplex
receptacle. Each receptacle of the GFCI Duplex is rated at 20 Amps,
the maximum total current from the GFCI Duplex is limited to the 20
Amps. Two kits are required.
K1816-1 FULL KVA ADAPTER KIT - Plugs into the 120/240V
NEMA 14-50R receptacle on the case front (which accepts 4-prong
plugs) and converts it to a NEMA 6-50R receptacle, (which accepts
3-prong plugs.)
T12153-9 FULL-KVA Power Plug - One dual voltage plug rated at
120/240V, 50 amps.
K930-2 TIG Module - Provides high frequency and shielding gas
control.for DC GTAW (TIG) welding applications. Its compact case
is designed for easy carrying, complete with a handle. High frequen-
cy bypass is built in
Requires K938-1 Contactor Kit, K936-4 Control Cable, and K814
Arc Start Switch.
K938-1 Contactor Kit - For use with TIG Module, Provides a “cold”
electrode until the triggering device (Arc Start Switch) is pressed.
K936-4 Control Cable - Connects TIG Module to EAGLE 10,000.
K814 Arc Start Switch - Attaches to the TIG torch for convenient fin-
ger control.
K937-45 Control Cable Extension - Allows TIG Module to be operat-
ed at distances up to 200ft. from the power source. Available in 45ft.
(13.7m).
K844-1 Water Valve Kit - For use with water cooled TIG torch,
Installs inside of TIG Module.
K939-1 Docking Kit - For Mounting the K930-2 TIG Module on top
of the EAGLE 10,000.