Audiovox PRESTIGE PMC-50 - Manual (Page 5)

4
“SHF” indication will appear on the display panel in addition to “SCAN”
and the first 10 seconds of each track on the disc will be played in random,
shuffled order. Press the Scan button again to cancel the Track Scan
mode but remain in Track Shuffle mode or press the Shuffle button to
cancel the Shuffle mode and remain in Track Scan mode.
When the Scan button is pressed and held longer than 2 seconds, the
DISC and “SCAN” indications will appear on the display panel and the
first 10 seconds of the first track on each disc will be played. When a
desired disc is reached, press the Scan button again and play of the disc
will continue (
DISC and “SCAN” will disappear from the display panel).
The Disc Scan mode will also be cancelled by activating the Track Select
5
, Repeat
7
, or Shuffle
8
functions.
bl
DISPLAY CALL (DSPL)
This unit can be set so that the disc/track/elapsed time or the Disc ID will
appear on the display panel as the priority setting. If the Display Call
button is pressed during disc/track/elapsed time display, the display will
change to Disc ID and this will become the priority setting to which the
display automatically returns after any other function is displayed. If the
button is pressed during Disc ID display, the priority setting will change
to disc/track/elapsed time display.
NOTE: When changing the display priority setting, only a momentary
press of the button is necessary. Holding the button in for too
long will put the unit into Disc ID programming mode (see “DISC
ID FEATURE” section of this manual).
If Disc ID is selected as the display priority setting, but a disc has not had
a Disc ID programmed for it, the display will remain on the disc/track/
elapsed time indication.
bm
REMOTESENSOR
The sensor for the infrared signal from the optional wireless remote
control is located behind this lens. For optimal operation of the remote
control, keep the lens clean and do not allow objects to block it.
“SHF” indication will appear on the display panel in addition to DISC and
“RPT” and play of the selected disc will continue but the tracks on the disc
will be played in a random, shuffled order instead of the normal progres-
sion. Press the Shuffle button again to cancel Shuffle mode but remain
in Disc Repeat mode, or press the Repeat button to cancel Disc Repeat
mode but remain in Shuffle mode.
8
TRACK/DISC SHUFFLE (SHF)
When the Shuffle button is pressed, the “SHF” indication will appear on
the display panel and the tracks on the disc will be played in a random,
shuffled order. The Forward Track Select button (
)
5
will also
select tracks in the shuffled order instead of the normal progression.
When all tracks on the disc have been played in shuffled order, the next
disc will be selected in normal order and its tracks played in shuffled
order. The Track Shuffle mode can be cancelled by pressing the Shuffle
button again or by activating the Repeat
7
function ( “SHF” will
disappear from the display panel).
When the Shuffle button is pressed and held longer than 2 seconds, the
DISC and “SHF” indications will appear on the display panel and both
the discs and the tracks will be played in a random, shuffled order. After
each track has been played, the changer will play a new disc in shuffled
order as well as a track on the disc in shuffled order. The Disc Shuffle
mode can be cancelled by pressing the Shuffle button again or by
activating the Repeat
7
function ( DISC and “SHF” will disappear from
the display panel).
9
TRACK/DISC SCAN (SCAN)
When the Scan button is pressed, the “SCAN” indication will appear on
the display panel and the first 10 seconds of each track on the disc will
be played in order. When a desired track is reached, press the Scan
button again and play of that track will continue (“SCAN” will disappear
from the display panel). The Track Scan mode will also be cancelled by
activating the Track Select
5
or Repeat
7
functions.
When the Shuffle button
8
is pressed during Track Scan mode, the