Lincoln Electric IM884 PRO-MIG 140 - Manual (Page 21)

C-2 ACCESSORIES C-2
INNERSHIELD (FCAW)
CONVERSION
Several changes are needed to convert the unit for
operation with the Innershield (FCAW) process:
1. Change the output polarity to DC(–). See “Work
Cable Installation” in Installation section for details.
2. Install proper drive roll for the wire size selected.
See “Changing Drive Roll” in Maintenance section
for details.
3. Install the proper gun liner 1 and tip for the wire size
selected. See “Component Replacement” in
Maintenance section for details.
4. Remove gas nozzle (if installed) and install the
gasless nozzle. To remove, simply unscrew.
5. Load wire into machine and thread into gun and
cable per “Welding Wire Loading” section.
1 The factory installed gun liner will feed up to .035
(0.9mm) wire.
REPLACEMENT PARTS
Complete Gun and Cable Assembly
L8311-6 (K530-4)
Contact Tip .025” (0.6 mm)
KP2039-1B1
Contact Tip .030” (0.8 mm)
KP2039-2B1
Contact Tip .035” (0.9 mm)
KP2039-3B1
Contact Tip-Tapered .025” (0.6 mm)
KP2052-1B1
Contact Tip-Tapered .030” (0.8 mm)
KP2052-2B1
Contact Tip-Tapered .035” (0.9 mm)
KP2052-3B1
Liner .025 - .035” (0.6 - 0.9 mm)
KP1937-3
Gas Diffuser
KP2040-1
Gas Nozzle
KP1938-1
Gas Nozzle-Tip Recessed 3/8” (9.5 mm)
Opening I.D.
KP1942-1
Gas Nozzle-Tip Recessed 1/2” (12.7 mm)
Opening I.D.
KP1942-2
Gas Nozzle-Tip Recessed 5/8” (15.9 mm)
Opening I.D.
KP1942-3
Spot Welding Nozzle
KP1956-1
Gasless Nozzle (Innershield Only)
KP1939-1
Pro-MIG 140