Axis Communications 207MW - Manual (Page 12)

12 AXIS 207MW - Accessing the Camera
AMC audio controls
These control the client computer’s speaker output. The controls are only available in
MPEG-4 video format and when audio is enabled, see Audio Settings, on page 19.
Click the Mute/Sound button to switch the sound off and on.
Use the slider to control the volume. The volume can be set between 0
and 100.
Video recording
To record video sequences:
• The Record button must be enabled (see above)
• The Video format on the Live View page must be set to MPEG-4.
Click the button to start the recording and click again to stop.
To view recordings, the PC used for viewing requires:
• an MPEG-4 decoder installed
• a media player that can play ASF files (e.g. Windows Media Player)
To make other settings, e.g. where to save recordings, right-click in the video image and
select Settings.
See also the AMC User’s Manual, available on the CD supplied with this product, or from
www.axis.com/techsup
The AMC viewer toolbar (AXIS Media Control) is available in Microsoft Internet
Explorer only. It can display the following buttons:
The Play/Stop button starts and stops the live video stream.
The Snapshot button saves a snapshot of the video image currently being
displayed. The Snapshot function and the target directory for saving snapshots
can be configured from the AMC Control Applet, which can be opened from
the Windows Control Panel or by right-clicking the image in Internet Explorer.
Click the View Full Screen button to make the video image fill the entire
screen area. No other windows will be visible. Press Esc (Escape) on the
computer keyboard to exit full screen.
Click the Record button to start a video recording. This must be enabled in
Setup > Live View Config > Layout