Mediabridge MUA-BA3 Windows XP - Manual (Page 22)

Manage My Local Bluetooth Adapters
On the Diagnostics tab, you can view the name, type, and status of each Bluetooth adapter that is
installed on this computer. If there is more than one Bluetooth adapter installed, you must designate
which one to use. To conserve battery power, you can disable the inactive adapters. Also, you can
view the properties of each adapter. The following adapter properties are displayed:
•
Device status. Indicates that the adapter is operating properly, or that there is a
problem/conflict.
• Manufacturer. The company that manufactured the adapter.
• Firmware Revision. The manufacturer's firmware version number.
•
Device Address. The Bluetooth Device Address assigned to the adapter when it was
manufactured
•
HCI Version. The version number of the Bluetooth specification with which the Host Controller
Interface complies.
•
HCI Revision. The revision number of the Bluetooth specification with which the Host Controller
Interface complies.
•
LMP Version. The version number of the Bluetooth specification with which the Link Manager
Protocol complies.
•
LMP Sub Version. The sub version number of the Bluetooth specification with which the Link
Manager Protocol complies.
To manage local Bluetooth adapters:
1. Right-click the Bluetooth icon in the taskbar notification area, and then click Bluetooth Configuration.
2. In Bluetooth Configuration, click the Diagnostics tab.