Nature Power 18 Watt Solar Battery Charger (40015) User Manual

Instruction manual

Advertising
background image


Instruction Manual


Important! Please read instructions before operating.

Model/Number:

Battery Charger 18 Watts (1.2 Amps) Amorphous Solar Panel/ 40015

Electrical: up to 18 Watts/ 1.2 Amps


Battery Charger Kit 18 Watts (1.2 Amps) Amorphous Solar Panel with 8
Amp Charge Controller/ 40158

Electrical: up to 18 Watts/ 1.2 Amps


Includes:

Solar Panel

Battery Clamp adapter

Mounting Hardware

8 Amp Charge Controller (ONLY with 40158)








To Install:
Step 1
: connect the charge controller to the battery
Using “to Battery” wire, connect the battery clamp adapters to
the charge controller. (J-Plug to J-Plug shown Fig. 1). Next,
Connect red positive(+) battery clamp to the positive(+) battery
terminal. Then connect the negative(-) battery clamp to the
negative (-) battery terminal.
Step 2: connect the charge controller to the solar panel
Using “to Solar Panel” wire on the charge controller. Connect J-
Plug to the solar panel J- Plug. (J-Plug to J-Plug shown Fig. 1).

WARNING: Connections must be placed in order and ensure
that the positive (+) matches the positive(+) and the negative
(-) matches the negative (-). (Connections are in Parallel)
Wrong connections may cause damage to parts or all of the
system.

Fig. 1 – J-Plug Connection

Confirm that connections are tight and secure. Panel can be
secured in place by using included mounting hardware.

Connecting Multiple Solar Panels?
Contact Nature Power for 3 -in-1 J-Plug connection wire, or
more information on connecting multiple solar panels.

Product Description:
Solar captures the sun’s energy to create power. This product is
designed charge 12 Volt Batteries. Any solar panel that is rated
over 12 watts requires the use of a charge controller. Solar
panel and charge controller come equipped with easy j-plug
adapters.
The Charge controller is designed to protect your 12 Volt
batteries from being overcharge and prevent discharging of the
battery overnight. LED lights display battery “Charged” or
battery “Charging”.

IMPORTANT:

Observe manufacturer’s safety procedures when
working around batteries and other electrical
equipment

This product is designed to be used on 12 volt
configurations in parallel ONLY
Positive (+) to Positive (+) Negative (-) to Negative (-)

This product will not charge, non-rechargeable
batteries

This product should be placed in a well ventilated area,
free from flammable gases

Make sure panel secured while vehicle is in motion to
prevent physical damage or harm to personal property

Panel must not be further than 20 ft way from battery
or loss of current may occur

Charge controller is NOT weatherproof and should not
be installed further than 2 ft way from battery

Charge controller can handle up to 130 Watts of solar
power

Limited Warranty: Proof of Purchase is Required (Receipt)
Solar Panel
1 Year: Free from defects in material and workmanship
5 Year: Warranted to generate up to 80% of rated power
Charge Controller
1 Year: Free from defects in material and workmanship

For more information:
NATURE POWER PRODUCTS
1-800-588-0590

[email protected]

www.naturepowerproducts.com

Advertising