Rhino Shelter Steel Carport 12W X 20L X 8H - Manual (Page 9)

3. Place the bottom of the Side Posts (4) on the Base Rail (5, 6) pins and drop the
Side Posts onto the pins. Then secure the Side Posts to the pins, using the Self
Tapping Screws (8). (See Figure F.)
SIDE POST
(4)
SIDE POST
SELF
(4) TAPPING
SCREWS
(8)
BASE RAIL
PIN BASE RAILS
BASE RAIL
(5, 6)
FIGURE F
(5, 6)
To Install The Panels On The Frame:
1.
Place the first Panel (1) on the roof with the under lapping edge of the Panel lined
up with the previously placed marks on the Peak Tubes (2) and the end of the
Panel overhanging the end of the building eleven inches.
(See Figures D and G.)
2.
With the Panel (1) lined up with the marks, attach the Panel to the first frame
section, using the Self Tapping Screws with Rubber Washers (9). NOTE: Install
the Self Tapping Screws about one inch above the ribs of the Panel.
(See Figure G.)
SELF TAPPING SCREWS TAPE
WITH RUBBER WASHERS (11)
(9)
PANEL
(1)
11” OVERHANG
17-1/8”
FROM
END OF
PEAK
UNDERLAPPING EDGE
FIGURE G
SC122008JJ Please DO NOT return unit to store or dealer. For all questions or shortages please contact PAGE 9
Customer Service at: 800-447-7079 or 203-877-7070