SnowEx SP-85SS - Manual (Page 10)

© Trynex International 2013 (REV A) F50768 10
Troubleshooting
Model # SP-85 / SP-85SS
PUSH SPREADER
NOT ENOUGH MATERIAL
FLOW
TOO MUCH
MATERIAL FLOW
POOR SPREAD PATTERN
EMPTY HOPPER
WRONG ROTATION.
SHOULD BE
COUNTER-CLOCKWISE
GATE STUCK CLOSED
(SEE ABOVE)
GATE STUCK OPEN
MATERIAL IS WET
SCREEN BLOCKED BY
CLUMPS OF MATERIAL
REMOVE / BREAK CLUMPS
AGITATOR IN PLACE
BROKEN SPINNER
FILL WITH MATERIAL
PHYSICAL OBSTRUCTION
LUBRICATE LINKAGE
DRIVE WHEEL SHOULD BE
ON LEFT WHEN PUSHING
CABLE STUCK
RECONNECT
ACTUATOR / LINKAGE
LUBRICATE GATE SLIDES
REPLACE MATERIAL WITH
DRY MATERIAL
NO:
REPLACE
HANDLE DOES NOT WORK
ADJUST GATE STOP
REPLACE BROKEN PART
REMOVE
REMOVE AND CLEAN
NO: REVERSE
AXLE ASSEMBLY
LUBRICATE
DROP SPREADER:
ADJUST FRONT GATE
SLIDE
INSTALL WEATHER COVER
ADJUST/REPLACE
HARDWARE / HANDLE
IF BROKEN, REPLACE
REPLACE