Assembly instructions, Model # sp-85 / sp-85ss – SnowEx SP-85SS User Manual
Page 6
Advertising
© Trynex International 2013 (REV A) F50768
6
Assembly Instructions
Model # SP-85 / SP-85SS
Step 1: Slide Actuator Rod up through the slot in the Spreader
Support Leg from the spinner side.
Step 2:
A: Attach Actuator Rod to Gate Linkage. Secure with Hair Pin Clip.
B: Remove Pivot Bolt that attaches the Gate Linkage to Frame.
Advertising
This manual is related to the following products: