Star Water Systems S1203 - Manual (Page 9)

16 17
8. Flush the toilet and watch for proper operation. Listen for
the pump to start. The pump unit requires proper venting
in order for toilet to flush. Check for leaks. Repeat flush
cycles to assure proper operation.
5. Install the water supply line from the existing water
shut-off valve to the toilet water supply connection.
6. Open the water supply valve and check for leaks.
The toilet tank should fill to the proper level. Adjust if
required.
7. Plug the pump’s power cord into the GFCI outlet.
TOILET INSTALLATION TOILET INSTALLATION
4. For hidden installation, (using optional extension kit
023260) install the rubber couplings to both the grinder/
tank unit and the toilet discharge and secure to extension
pipe with worm clamps provided.
IL1754
Grinder/tank
unit
Sched 40
PVC Pipe
Clamps
Couplings
Ballcock
Toilet
Tank
Rubber Washer
Plastic Adapter
IL1739
Water Supply
Shut-off Valve
RESET
RESET
TEST
TEST
IL1756
Pump
Plug
GFCI
Outlet
Check
for
leaks
Listen for pump
to start
IL1757
9. Install an elongated toilet seat for Model S1202 or round
toilet seat for Model S1201 (sold separately). Set the lid
on the toilet tank.
Round
Bowl
Elongated
Bowl
IL1758
4
5
6
7
8
9