Triton 9610 Operation Manual - Manual (Page 101)

TRITON SYSTEMS, INC. 5-59
OPERATION MANUAL - MODEL 9610 SECTION 5 - MANAGEMENT FUNCTIONS
F
UNCTION
: RESET SEQ #
F
ACTORY
D
EFAULT
: N/A
A CCESS I NSTRUCTIONS :
1.) Select TERMINAL CONFIGURATION from the
MANAGEMENT FUNCTIONS menu.
2.) Select SET TERMINAL PARAMETERS.
3.) Choose the RESET SEQ # option.
D ESCRIPTION :
NOTE: This feature is not supported by all processors.
Select the RESET SEQ. # option from the TERMINAL PARAM-
ETER menu to reset the sequence number that is printed on the
journal printout and receipt to ‘00000000’.
Resetting the SEQUENCE # is an operation that should usually be
performed at the request of your processor. Use of this function is
not required during normal operation.
E
RROR
C
ONDITIONS
:
There are no error conditions directly associated with this function.