Triton 9610 Operation Manual - Manual (Page 59)

TRITON SYSTEMS, INC. 5-17
OPERATION MANUAL - MODEL 9610 SECTION 5 - MANAGEMENT FUNCTIONS
F
UNCTION
: STATUS
F
ACTORY
D
EFAULT
: N/A
A CCESS I NSTRUCTIONS :
1.) Select DIAGNOSTICS from the MANAGEMEN FUNCTIONS
screen.
2.) Select the STATUS option.
D ESCRIPTION :
The STATUS command is used to check the status of four func-
tional areas of the dispensing mechanism. These areas are the
current Status of Count Sensors, the current Double Detect sta-
tus, the current average thickness of the documents being dis-
pensed, and the current average length of the documents being
dispensed. Any of the following sets of return codes will indicate
that all of the areas are operating normally:
1.) ‘40 40/50 40 36’
2.) ‘50 40/50 40 36’
3.) ‘44 40/50 40 36’
4.) ‘54 40/50 40 36’
Note that the value of the second number in a set of return codes
may be either 40 or 50 (40/50). The cancel button must be pressed
to return to the diagnostic’s menu.
E RROR C ONDITIONS :
If any code other than what is indicated above is displayed contact
your service provider for assistance.