Triton RL5000 User Manual - Manual (Page 65)

4 5
C
URRENCY
H
ANDLING
Installing the Reject Vault
Using the reverse of the steps taken to re-
move the reject vault, slide the reject vault
back into its slot in the mechanism. Make
sure the vault is fully inserted.
Replacing reject vault.
Verify Operation of All
Dispensers
1. Close and lock the security cabinet.
2. Verify the cassettes are Locked and In
Service. (Multi-cassette use)
3. In Management Functions, select
Diagnostics, then Dispenser.
4. Select the Test Dispense option.
Select either individual cassettes
that are installed (“A”, “B”, “C”,
or “D”) or “ALL CASSETTES ”.
A prompt appears asking how
many notes to dispense. (below)
The Test Dispense operation will
start.
5. The Test Dispense command
instructs the dispenser to
dispense, minimum, one note from
each installed and operational
cassette into the reject vault. This
test exercises the dispenser without
sending notes to the exit.
6. After completion of the Test
Dispense, the following prompt is
displayed below - “Test Dispense
Completed Successfully - Dispense
Count , A: (# of notes), B: #, etc