USGlobalsat GH-625M Heart Rate Monitor Instructions - Manual

How To Show The Heart Rate Monitor After The Firmware Update
After performing the Firmware Update on your GH-625M, the Heartrate Monitor seems to disappear. So
here are the steps to make it show up on your watch again.
1. Go to “Configuration”
2. Go to “User Setting”
3. Go to “Custom Page”
4. Select the Page of your choice.
5. Select the Field Number of your choice.
6. Push the “OK” button and scroll through the list until you reach “Heartrate” and select it.
7. Push ESC and you’re done!