USGlobalsat GH-561 How To Save A Waypoint Manual User Manual

How to manually save a waypoint

background image

How To Manually Save A Waypoint

If you want to manually enter in the latitude and longitude values into the GH-561 and have it
point you to that direction, please follow these steps:

1. First, turn ON your device and allow it to get a GPS fix.

2. Then, press the

button. You should be able to see this on the screen:

3. Then press the


button on the Confirm screen, to scroll through the coordinate


4. When the specific coordinate value that you want to edit is highlighted, press the OK


5. This will bring up a pop-up, which has numbers, and use the


buttons to scroll

through the numbers.
Click OK to select the number and click OK on the

icon to close the pop up.

6. Repeat steps 4 and 5 until you have filled in all the values for your coordinates.
7. Then,

highlight “Confirm” and press the OK button.

8. Now refer to page 10 of the GH-561 User Manual


) on how to be

directed to that new waypoint you created.

If you have any questions, feel free to contact us:

Technical Support Contact

Hours: M-F 8:30am ~ 5pm PST

[email protected]

Toll Free: 888.323.8730