Avaya DEFINITY Network Management 4 - Manual (Page 30)

DNM-NT/Windows 2000 4.0 Installation and Getting Started
3 Installing DNM
Technical Verification Checklist
December 2001
Page 30
Technical Verification Checklist
At the completion of the DNM installation, the engineer at the Technical Services Center
(TSC) must complete the tasks below to insure that DEFINITY Proxy Agent (DPA) is
properly administered and functioning:
1 Verify that the customer completed and faxed PA001 Administration Request form
(Rev. 08/01) to the TSC.
2 Verify that the TSC has updated the System Management database with the current
data from the PA001 form.
3 Verify that DPA is administered to DNM. Refer to "Adding DEFINITY Proxy
Agents" on page 40 .
4 Generate an exception event. Verify the object color for the exception status correctly
displays on the DNM screens.
5 In addition, check the information below:
• Verify that DPA and DNM can receive alarms from each managed node
• Verify that the TSC can receive alarms from each managed node
6 Verify that DEFINITY Proxy Agent telnet feature works.