Vapamore MR-100 Primo - Manual (Page 7)

‘ ’
OPERATION
Fig. 17
Attach the floor cleaning head to the end of the
extension tube (use 1 to 3 tubes as desired). Ensure
that the floor cleaning head clicks into place. (Fig.13)
The floor cleaning head can be used with or without the
micro fiber cloth depending on the surface to be
cleaned. Place the floor cleaning head on the micro
fiber cloth and secure the overhanging material under
the clips located on left and right side of the floor
cleaning head. (Fig.14)
Fig.13
The floor cleaning head is ideal for tile, stone, vinyl, and
wood floors along with cleaning washable walls and
hard surfaces. It can also be used on carpet to sanitize,
deodorize, kill allergens, bedbugs and dust mites.
(Fig. 15) (Attach the micro fiber cover to allow the floor
cleaning head to glide when using on carpet).
Fig.14
Fig.15
The detail adaptor can be attached directly to the steam
gun or to any of the extension tubes. (Fig. 16)
Fig. 16
The detail adaptor can also be used on its own as a
straight jet nozzle tool or along with the 90 degree jet
nozzle attachment. These tools are great for removing
soap scum in the bath, shower and around faucets. Also
for cleaning tight areas such as toilet hinges where high
pressure steam can reach and blow out dirt and debris.
This tool is most effective when applied direct to the
surface being treated. The steam temperature will
condense and cool within 1’’ of the jet tip. (Fig.18)
Fig. 18
Use on steam gun
or extension tube
Carpets
Hard floors
CLICK
ACCESSORIES / DETAIL ADAPTOR
Detail adaptor
90 Deg. jet nozzle
GO TO VAPAMORE.COM TO SEE THE MR-100 PRIMO INSTRUCTIONAL VIDEO
The detail adaptor is needed in order to use the brushes,
detail scraper clothes / fabric - smooth surface tool, and
the jet nozzle attachment. To attach any of these
accessories, Push the accessory onto the detail adaptor
aligning the arrow on the accessory with the arrow on
the detail adaptor. Twist the accessory on the detail
adaptor to lock into place. Remove in the reverse order.
(Fig.17)
The steam gun, extension tubes, and floor
cleaning head can be stored (as shown on the cover
page of this instruction manual) by inserting the tab on
the floor cleaning head into the slot located on the side
of the Vapamore.
!