Video Mount Products LCD-2537CB - Manual (Page 4)

Step 5
Attach the support tube to the extension tube using
the ¾” screw and washers .
Step 6
Attach the mounting plate assembly from step 2 to your LCD
monitor using the M4 or M5 screws or as appropriate.
Step 7
Attach the extension tube to the ceiling plate using
the 5/16” screw and nylon nut . Secure the ¾” screw
from slipping in the extension tube by tightening the
¼” brake screw into the threaded hole in the side of the
extension tube using the Allen key .
Step 8
Insert end plugs into the support tube . For cable man-
agement, insert the cable clips by pushing the arrow ends
into the square holes in the support tube .
Please verify that all nuts and screws are securely tightened.
Step 5: Attaching the extension
tube to the support tube
Step 6: Attaching the fl at panel
to the mounting plate
Step 7: Attaching the extension
tube to the ceiling plate
WARNING: The installer of these products must verify that
the mounting surface, ceiling or wall, will safely support the
combined weight of all attached equipment and hardware.
Video Mount Products will not be held liable for the improper
use or installation of its products.
Enjoy Your Mount!
2
17
20
2
19
10 11
18
2
1
21
3 2
14
22
10
13
3
3