Video Mount Products LCD-1CW - Manual (Page 4)

Step 5
Attach the support tube to the extension tube using the
M12 screw and washers .
Step 6
Attach the extension tube to the ceiling plate using
the 5/16” screw and nylon nut . Secure the M12 screw
from slipping in the extension tube by tightening the ¼”
brake screw into the threaded hole in the side of the exten-
sion tube using the Allen key .
Step 7
Attach the mounting plate to the swivel bracket using
the M6 screw and nylon nut .
Step 8
Insert end plugs into the support tube . For cable man-
agement, insert the cable clips by pushing the arrow ends
into the square holes in the support tube .
Please verify that all nuts and screws are securely tightened.
Step 5: Attaching the support
tube to the extension tube
Step 6: Attaching the extension
tube to the ceiling plate
Step 7: Attaching the
mounting plate to the
swivel bracket
WARNING: The installer of these products must verify that
the mounting surface, ceiling or wall, will safely support the
combined weight of all attached equipment and hardware.
Video Mount Products will not be held liable for the improper
use or installation of its products.
Enjoy Your Mount!
10
3 2
11
14
20
2
5
2
18
4
13
7
17
19
2
9
1
10
3
3