Vitrex MULTITOOL - Manual (Page 6)

Multi-Tool www.vitrex.co.uk Tel: +44 (0)1253 789180
HOW TO USE MULTI-TOOL
Before setting up, repair or maintenance of the appliance, you must always turn off the operating switch and pull
out the mains plug.
Before Initial Operation
Check if the rated frequency of the mains supply corresponds to the details of the type place.
Before using the tool, read the instruction book carefully.
Elements of the Multi-Tool
①Switch ②LED light ③ Speed button ④Dust Extraction Channel ⑤Standard Accessories
Switch on the machine by pushing button ①
The LED will be light after the machine is switched on ②
Adjust the speed by turning the speed button ③
The dust can be extracted by the dust extraction system inside the body ④
Standard accessory pack for different applications ⑤
How to assembly the accessories
Match the hole on the accessories to the spindle on the machine.
Ensure the working head of the accessories are facing outwards - see illustration A1.
Illustration A2 demonstrates how to attach the accessories incorrectly.
Assemble the accessories with the hexagonal key provided.