WycoTool Sure Speed electric vibrator - Manual (Page 9)

User Manual
Page 9 June 2014
Locking
Lever
Figure 7: Locking lever adjustment
Disconnecting the Vibrator Casing
(Quick-Disconnect)
1 Be sure the quick-disconnect locking lever on the motor
is in the up position
2 Rotate the core and casing counterclockwise from the
lock position to the unlock position
3 Pull the casing end straight out of the quick-disconnect
connector on the motor
4 Be sure that the locking lever is in the down position
when storing the motor to avoid damage to the lever
Connecting the Vibrating Casing
(Threaded Connections)
OTEE: N The casing must be fitted with a thread
connector end
Figure 8: Threaded casing connector
1 Line up threads of the shaft with the threaded motor
connector Hold the casing end firmly and rotate the
casing until it engages into the motor
Shaft
Threads
Figure 9: Shaft insertion
2 Hold the casing assembly in one hand while carefully
rotating the motor counterclockwise until motor is snug
to the shaft See Figure 10