Aquametrix P/R60C-4 Differential pH or ORP Probes - Manual (Page 2)

Model P/R60C-4 Differential pH or ORP Probes
www.WaterAnalytics.net 978-749-9949 Toll free - 855-747-7623 (855-pHProbe)
Technical Data
Related Products
Measuring Range
pH 0 to 14 pH
ORP -1000 to +1000 mV
Flow Rate 10 ft./sec maximum (3 metres/sec)
Flow should be as low as possible in low con-
ductivity water and in solutions with high sus-
pended solids
Wetted Materials CPVC, kynar, glass, titanium palladium alloy
and EPDM (platinum for ORP probe)
Transmission
Distance
3000 ft. (900 m)
Sensitivity
pH 0.01 pH
ORP 0.1 mV
Stability
pH 0.03 pH per day, non-cumulative
ORP 2 mV per day, non-cumulative
Temperature Compensation
Automatic -5 to 95°C (23 to 203°F)
Pressure Limit 100 psig at 65°C maximum
Temperature Limits
CPVC -5 to 95°C (23 to 203°F)
The temperature limit of probes in flow-through
applications is limited by pressure and by the
pipe fitting material.
Probe Cable 5 Conductor plus shield, 15 ft. (4.6 m) long
CABLES & ACCESORIES
JB-1 NEMA 4X junction box
C42-5PXXX Interconnect cable; specify length
C35-17K Salt bridge kit w/ kynar outer junction
(Package of 3)
C35-17 Salt bridge kit w/ ceramic outer junction
(Package of 3)
CALIBRATION SOLUTIONS
A35-13 pH 4 Buffer, 500 mL.
A35-14 pH 7 Buffer, 500 mL
A35-24 pH 10 Buffer, 500 mL
A35-40 ORP Buffer, 200 mV, 500 mL
A35-41 ORP Buffer, 600 mV, 500 mL
Ordering Information
P60C-4 pH probe, 1 1/2” NPT threaded body
P60C-4-H pH probe with Hard glass electrode
P60C-4-A pH probe with Antimony electrode
R60C-4 ORP probe, 1 1/2” NPT threaded body
R60C-4-H ORP probe with Hard glass electrode
R60C-4-G ORP probe with Gold electrode
Differential Measurement Technique
Dimensions