Installation, Servers, Client – Avigilon Lenel OnGuard to ACC Alarm Gateway Integration User Manual
Page 5: Checking the licence, Servers client checking the licence
Avigilon Control Center 5 System Integration Guide with Lenel OnGuard
2
Installation
Servers
•
Install the Lenel Integration NVR license (
ACC5-LENL-ONGRD
) from Avigilon on one
of the servers in your Site.
Be aware that you must connect directly to this Avigilon server to use the
OnGuard to ACC Alarm Gateway.
•
Install the OnGuard to ACC Alarm Gateway executable
(
enel OnGuard
Server software.
Client
•
Install the Avigilon Control Center Client software on every workstation that
requires access to the integration.
Checking the Licence
After you have installed all the required software, you can check if the Lenel Integration
licence has been properly applied:
1.
Open the Avigilon Control Center Admin Tool.
2.
Select the Settings tab and click Licensing. The License Activation dialog box
appears.
The dialog box must say Integration Connections: Yes or the software was not
properly licensed.