Avigilon Lenel OnGuard to ACC Alarm Gateway Integration User Manual
Page 7
Avigilon Control Center 5 System Integration Guide with Lenel OnGuard
4
1.
In the Avigilon Control Center Client software, open the Site Setup tab and
click Alarms.
2.
In the Alarms dialog box, click Add.
3.
On the Select Alarm Trigger Source page, select External Software Event from
the Alarm Trigger Source drop down list and click Next.
5.
On the Select Linked Cameras page, select the cameras to link to this alarm,
and set the Pre-Alarm Record Time and the Recording Duration. Click Next.
6.
On the Select Alarm Recipients page, select the Avigilon integration user and
any other groups or users who need to receive alarm notifications, then click
Next.
NOTE: The integration user must be linked to the alarm or the alarm will not be displayed
in the OnGuard to ACC Alarm Gateway configuration application. For more
information, see Adding an Integration User in Avigilon on page 3.
7.
(Optional) If you would like to trigger an action when an alarm is
acknowledged, select the Activate selected digital output(s) on alarm
acknowledgement check box.
a.
Select the digital outputs to be activated and specify the duration.
b.
Select the Require user confirmation before activating digital output
check box if users need to confirm the alarm before the digital output
action is initiated.
c.
Click Next.
8.
Enter a Name for the alarm and set the alarm Priority. The alarm name is used
to identify the alarm during the integration.
9.
Ensure the Enable Alarm check box is selected and click Finish.