Avigilon ACC Enterprise Client Version 4.12 - Manual (Page 49)

Setup
41
a. If the user must add comments about the alarm, select the Require a comment when
acknowledging alarm check box.
b. If a digital output must be activated when the alarm is acknowledged, select the Activate
selected digital outputs on alarm acknowledgement check box. Then, select the
digital outputs to be activated.
c. If the digital output should only be activated when confirmed by a user, select
the Require user confirmation before activating digital output(s) check box.
d. Click Next.
8. On this page, complete the following:
Figure E.
Select Alarm Properties page
a. Enter a name for the alarm.
b. Select a priority for the alarm. Priority: 1 is the highest alarm priority.
c. Select a schedule for the alarm. See Scheduling Server Events for more information.
d. Make sure the Enable Alarm check box is selected to enable the alarm.
9. Click Finish.