Catskill Craftsmen 1426 - Manual (Page 7)

Back Assembly
Front Assembly
4
Upright Back Assembly with Braces, etc. Attached from Step 3. Caster holes in
legs should be facing down as shown in Illustration 4A. Attach Bastion Posts and
tap in 3/4” Steel Pins into front legs and Front Vertical Brace. Working Right to
left, slide the bastion posts and 3/4” Steel Pins into the Side Braces, waiting to
tighten set screws until the Center Drawer Glide Support Stick and the Left Side
Braces are all seated properly.
Drawer Glide Support Sticks should also be inserted into the Front Assembly,
using the previously inserted 3/4” Steel Pins.
ATTACHING FRONT ASSEMBLY
Illustration 4A