Catskill Craftsmen 1448 - Manual (Page 12)

11
STEP 9
ATTACH TOWEL BAR
See Illustrations 10 and 11. Screw Nickel Plated Towel Bar Posts into the drawer
front using 1-1/4” #8 screws. Attach pipe holder by sliding supports over posts
and secure with tiny set screws using allen wrench provided. Set screws go
toward bottom of draw. Slide towel bar through holes in supports and secure in
place with set screws. Bar should be equidistant on either side of the supports.
Tap end caps into place. See illustration 12.