Catskill Craftsmen 1538 - Manual (Page 10)

STEP 11
A. Upright unit.
B. Determine if you want the Knife Rack on the left or right Side Panel. The Handle/Towel Bar will go
on the other. Then attach the Knife Rack to the Side Panel with two 1 1/4” x #8 screws from inside the
panel. Place a washer over the screw so that so that the head won’t pull through the side panel.
C. Attach Towel Bar to the other Side Panel with 1 1/4” #8 screws from inside the Side Panel. Place a
washer over each screw.
ILLUSTRATION 11
STEP 12
A. Angle the Bottom Shelf as necessary to pass it
through the opening in the cabinet top until it
rests on the pins installed in step 8.
ILLUSTRATION 12