Step 1, Step 2 – Catskill Craftsmen 1538 User Manual

Page 4

Advertising
background image

STEP 1

A. Tap/insert ONE 1 1/2” pin into each end of all the doors. DON’T OVERDRIVE PINS! Pins should

stick up about 1/2” when seated.

B. Attach the magnet plate (may be stuck to magnet!) with the 1/2” #4 screw to the top of the doors.

Bumps go toward the wood.

C. Attach door handles with 1” truss head machine screws.

ILLUSTRATION 1

STEP 2

A. Take the 2 front braces and tap/insert one 3/4” steel pin into each end of both braces until

seated. About 3/8” will stick out when seated. OK if loose.

ILLUSTRATION 2

Advertising