Catskill Craftsmen 51536 - Manual (Page 4)

5/8” #7
1 1/4” #8
5/8” #7
5/8” #7
The glides look almost alike;
however, they are stamped
CR for cabinet right and CL
for cabinet left.
Left Side
Front
Right Side
Front
The “L” brackets are attached to the Glide Support using the small hole in the “L” bracket
Flush with back
Flush with back
Note: Glide holes sometimes change, just make
sure the cabinet glides are flush with the back
of the glide supports & pilot holes will line up -
only 2 holes are used!
STEP 1
Glide Support Assembly
Decide on which side you want the
handle/towel bar. This will determine on
which side you place the drawer glides.