Catskill Craftsmen 53017 - Manual (Page 8)

STEP 7
A. Tap/insert ONE 1 1/2” pin into each end of both doors. DON’T OVERDRIVE PINS! Pins should
stick up about 1/2” when seated.
B. Attach the magnet plates (may be stuck to magnet!) with the 1/2” #4 screw to the top of both doors.
Bumps go toward the wood.
C. Attach door handles with 7/8” truss head machine screws.
1 1/2” Long 3/16” DIA. Steel Pin
4 used in
this step
7/8” Truss Head Machine Screw
4 used
in this step
1/2” Phillips Flat Head #4 Screw
2 used in this step