Catskill Craftsmen 51576 - Manual (Page 12)

STEP 13
A. Insert and tap caster sockets with hammer
until the teeth grab the wood. DON’T POUND
SOCKET FLAT OR CASTER SHAFT WILL
NOT ENTER.
B. Insert casters and seat by pushing straight
downward with heel or your hand, or tap into
place with a hammer. Don’t be afraid to give
them a good downward whack on the solid
metal part of the caster!
C. Locking wheels usually go on front.
STEP 14
A. Upright unit. Tap 1” pins into holes in the side
panels (4 per side) for shelves.
B. Take bottom shelf and place it on the set of
back pins. Close doors and shelf will drop into
place.
C. Place top shelf on pins.
D. Insert drawer. If drawer front hits the bottom of
the cabinet tap on the top front brace or tap top
front brace down. Loosten bolts as necessary.
When drawer moves freely, retighten all bolts!
E. Tap wooden disks into sides.