Delmhorst Instrument RDM-3P - Manual (Page 20)

Copyright  2005, Delmhorst Instrument Co.
Page 17 of 28
o The fifth line shows the value of the highest MC reading stored in the
specific job.
There are no control entries present in this screen, such as “MORE”,
“CANCEL” or “DONE”. The only available option is to return to the storage
menu screen, by pressing any key.
o Stored Readings: This menu option selects the measurement review
feature of the meter, allowing the user access to measurements stored in
memory. Only readings belonging to the selected job will be retrieved.
NOTE: Stored readings can only be reviewed in ascending sequence (ex:
reading 1, 2, 3, etc.). The meter assists moving to a set of readings later
in the sequence by allowing the user to specify a start point for this
ascending sequence, such that the readings of interest will be displayed
first. The reading review process may be abandoned at any time.
o Show MC Readings: This feature selects stored MC readings for review.
Choosing this feature allows the user access to a job overview screen.
This screen always begins by displaying the current job, whether it
contains any readings or not.
The Left and Right buttons can be used to navigate sequentially through
all available job numbers (1-98) while the “JOB:” entry is selected. Jobs
that are undefined or empty will display “no readings”. Use the Up or
Down buttons to change the line selection on the screen. An empty or
undefined job will only have one other selectable option: CANCEL.
Choosing this option and pressing the Select (center) button will bring the
user back to the Storage Menu.