Detcon DM-600IS - Manual (Page 19)

DM-600IS
DM-600IS Instruction Manual Rev 1.5.9 Page 15 of 37
Drain
Conduit
"T" EYS Seal Fitting
PGM 1
PGM 2
HOUSTON, TE XAS
FLT CAL
MicroSafe Gas Sensor TM
MODEL DM-6xx
ALM ALM
1 2
Figure 6 Typical Installation
5.3 Local Electrical Codes
Sensor and transmitter assemblies should be installed in accordance with all local electrical codes. Use
appropriate conduit seals. Drains & breathers are recommended. The sensor assemblies are CSA-NRTL
approved for Class I; Groups B, C, D; Div. 1 environments.