SilentKnight VisorAlarm Manager - Manual (Page 10)

VisorALARM Manager – Quick Guide
10
Doc. DM380-I
Rev. 3.0
Select the pattern you want to change from the patterns list. Once selected,
modify the required parameters. Subsequently click on the “Update” button to
record the changes in the VisorALARM.
•
“Update accounts”: Update the parameters of the mIP/IPDACT devices which
“Reference Pattern” matches the selected with the values of this pattern. After
the update of the parameters the mIP/IPDACT is restarted for the new
parameters to take effect.
•
“Delete”: Eliminate a pattern.
Select the pattern you wish to delete from the patterns list. Click on the
“Delete” button to eliminate the pattern and save the changes in the
VisorALARM.
Figure 8
Since Patterns are used to setup the mIP/IPDACT parameters when a device is registered, the
meaning of each parameter has been previously explained.
8.
Getting started with a factory VisorALARM
STEP 1
Launch the program and connect with the default IP Address.