Optional media extender modules – Accton Technology VM2548 User Manual

Page 20

Advertising
background image

About the VDSL Switch-VS2512A

1-8

Optional Media Extender Modules

Optional 1000BASE-SX Module (VM2512A-1SX-SC-M)

Figure 1-6. Single-Port 1000BASE-SX Gigabit Module

Using multimode fiber optic cable, the 1000BASE-SX port can be connected to a
remote site up to 550 m (1805 ft) away. The 1000BASE-SX Gigabit module operates
at 1 Gbps, with support for full-duplex mode and flow control. This module is fitted
with an SC connector, but you can attach an ST plug to the switch using the SC-ST
Converter (Part Number: ST5002).

Note: If the attached device does not support auto-negotiation, you will have to manually

configure the other device to full duplex and no flow control.

Optional 1000BASE-LX Module (VM2512A-1LX-SC-S)

Figure 1-7. Single-Port 1000BASE-LX Gigabit Module

Using single-mode fiber optic cable, the 1000BASE-LX port can be connected to a
remote site up to 5 km (16404 ft) away. The 1000BASE-LX Gigabit module operates
at 1 Gbps, with support for full-duplex mode and flow control. This module is fitted
with an SC connector, but you can attach an ST plug to the switch using the SC-ST
Converter (Part Number: ST5002).

Note: If the attached device does not support auto-negotiation, you will have to manually

configure the other device to full duplex and no flow control.

Optional 1000BASE-X GBIC Module (VM2512A-1GX-GBIC)

Figure 1-8. Single Port 1000BASE-X GBIC Module

RX

TX

VM2512A-1SX-SC-M

1000BASE-SX Multimode Module

RX

TX

VM2512A-1LX-SC-S

1000BASE-LX Singlemode Module

VM2512A-1GX-GBIC

1000BASE-X GBIC Module

Advertising
This manual is related to the following products: