Accton Technology VM2548 - Manual (Page 22)

About the VDSL Switch-VS2512A
1-10
Optional 10/100BASE-TX Module (VM2512A-4TX)
Figure 1-11. 4-Port 10/100BASE-TX Module
Using Category 3, 4, or 5 twisted-pair cable for 10 Mbps links or Category 5
twisted-pair cable for 100 Mbps links, you can connect to another device up to
100 m (328 ft) away. The 10/100BASE-TX module operates at 10, 100 Mbps, full
and half duplex, and supports auto-negotiation of speed and flow control.
Optional 100BASE-FX Module (VM2512A-1FX-SC-M)
Figure 1-12. 1-Port 100BASE-FX Multimode Module
Using 62.5/125 or 50/125 micron multimode fiber cable, the 100BASE-FX port can
be connected to a remote site up to 2 km (1.24 miles) away. The 100BASE-FX
module operates at 100 Mbps, with support for full-duplex mode and flow control.
This module is fitted with an SC connector.
Optional 100BASE-FX Module (VM2512A-4FX-MTRJ-M)
Figure 1-13. 4-Port 100BASE-FX Multimode Module
Using 62.5/125 or 50/125 micron multimode fiber cable, the 100BASE-FX ports can
be connected to a remote site up to 2 km (1.24 miles) away. The 100BASE-FX
module operates at 100 Mbps, with support for full-duplex mode and flow control.
This module is fitted with 4 MT-RJ connectors.
VM2512A-4TX
10/100BASE-TX Module
VM2512A-1FX-SC-M
100BASE-FX Multimode Module
VM2512A-4FX-MTRJ-M
100BASE-FX Multimode Module