GEAR4 HouseParty Rise Wireless - Manual (Page 4)

2 GEAR4 | HouseParty Rise Wireless | User Manual
HouseParty Rise Wireless
Please read before use.
Product features:
■ Bluetooth wireless clock radio
■ 12 / 24 hour clock with alarm
■ Sleep countdown timer
■ Dimmable LED display
■ 2 programmable alarms
■ FM radio with programmable presets
■ Volume and snooze control dial
■ Line-in port for use with other music players
■ Charge mobile devices via the USB charging
port
Getting started:
■ Plug the power cable into the back of the unit
and then into the mains supply.
■ Install the coin-cell battery in the battery
compartment on the bottom of the unit. This
battery prevents the clock settings from being
lost in the event of a loss of power.
■ To activate the speaker, press the POWER
button ( ).
■ To select the mode, press the Mode button to
scroll between the options (Bluetooth/ FM /
AUX).
■ Press the brightness button on the
speaker to adjust the LED screen brightness.
There are 5 adjustable brightness levels.
To pair your bluetooth device
with the speaker:
■ On your Bluetooth device go to Bluetooth
settings. Turn Bluetooth ON.
■ On the HouseParty Rise Wireless press the
MODE button until Bluetooth ( ) mode is
selected.
■ Press and hold the Bluetooth ( ) button on
the speaker until the Bluetooth ( ) icon
flashes quickly and an audio tone is played
(about 6 seconds). This indicates the speaker
has entered pairing mode.
■ ‘HouseParty Rise’ will appear under devices
within the Bluetooth ( ) menu. Select this to
pair.
■ Your Bluetooth device will then pair and
connect with the speaker after several
seconds.
■ To play music, go to the music player on your
device and select a track.
■ To pair any additional devices, please follow
the above process again.