GEAR4 HouseParty Rise Wireless - Manual (Page 6)

4 GEAR4 | HouseParty Rise Wireless | User Manual
■ The hour display will begin to flash. Turn the
SET button to adjust the hour. Now press the
SET button once again to save.
■ The minute display will start flashing. Turn the
SET button to adjust the minutes. Press the
SET button to save.
■ The display will begin to flash with one of the
days of the week. Turn the SET button to
change the day of the week you require. Now
press the SET button to save.
TO ACTIVATE AND DEACTIVATE
THE ALARMS:
■ Press the Alarm button on the speaker until
the alarm you wish to activate is illuminated.
■ When the alarm is not illuminated,
it is deactivated.
To set the alarm:
■ Press the Alarm button until the alarm you
wish to set is illuminated.
■ Press and hold the Alarm button until the
hour digits begin flashing.
■ Turn the SET button to adjust the hour. Now
press the SET button to save.
■ The minute display will now begin to flash.
Turn the SET button to adjust the minutes.
Now Press the SET button to save.
■ The days of the week will start flashing. Turn
the SET button to adjust between weekends,
weekdays or all week. Press the SET button
to save.
■ Turn the SET button to scan through alarm
modes – FM or buzzer. Press the SET button
to save.
■ Turn the SET button once again to adjust the
volume level. Press the SET button to save.
Snooze function:
When the alarm sounds, press the
SNOOZE button on the speaker.
The alarm will repeat after 10 minutes.
■ Press any button except the SNOOZE button,
to stop the alarm for that day.
■ If no buttons are pressed, the alarm will ring
continuously for 1 hour.
Sleep function:
The sleep timer switches the unit off
automatically after a set interval.
■ To activate the sleep timer, press the SET
button when the speaker is switched ON.
■ Turn the SET button to cycle through OFF,
10min, 20, 30...60. Press SET to confirm the
Sleep Timer. This is the time after which your
speaker will turn off.
■ To turn off the sleep timer, repeat the above
steps and rotate to OFF.
Note: When setting the above functions, the
speaker will return to its previous display after