GW Instek GLA-1000 Series Quick start guide - Manual (Page 4)

Cleaning • Use a soft cloth dampened in a
solution of mild detergent and
water. Do not spray any liquid into
the GLA.
• Do not use chemicals or cleaners
containing harsh materials such as
benzene, toluene, xylene, and
acetone.
Operation
Environment Location: Indoor, no direct sunlight,
dust free, almost non-conductive
pollution (Note below)
• Relative Humidity: < 80%
• Altitude: < 2000m
• Temperature: 0°C to 50°C
Storage
Environment Location: Indoor
• Relative Humidity: < 80%
• Temperature: -40°C to 80°C
Do not dispose electronic equipment
as unsorted municipal waste. Please
use a separate collection facility or
contact the supplier from which this
instrument was purchased.