GW Instek GOS-6103C - Manual (Page 7)

GOS-6103C OSCILLOSCOPE
USER MANUAL

9

4. PANEL INTRODUCTION
After the instrument is switched on, all the important settings are displayed
in the readout. The LED’s located on the front panel assist operation and
indicate additional information. Incorrect operation and the electrical end
positions of control knobs are indicated by a warning beep.
Except the Power pushbutton (POWER), the Focus control (FOCUS), the
Scale Illumination control (ILLUM) and the Trace Rotation control, all
other controls are electronically selected, and their functions and settings
can therefore be stored.
The front panel is subdivided into six sections:
Display controls
Vertical controls
Horizontal controls
Trigger controls
Measurement and SAVE/RECALL controls
Input connectors
GOS-6103C OSCILLOSCOPE
USER MANUAL

10

Front panel of GOS-6103C