GW Instek GSP-810 User Manual - Manual (Page 29)

GSP-810 User Manual
27
5.0 Quick Use Index
(1)
Full Span : Set CENTER=500MHz, SPAN=100MHz/Div, REF LVL=20dBm.
See CENTER FREQ, SPAN, REF LVL(P. 13~15).
(2) Max. Hold : SHIFT + TRACE → 1.Max Hold. See TRACE (P. 19).
(3) Average : SHIFT + TRACE → 2.Average. See TRACE (P. 19).
(4) View the trace : SHIFT + TRACE → 3.Freeze. See TRACE (P. 19).
(5) Recall Setting : Memory → 1.Recall. See Memory (P. 20).
(6) Save Setting : Memory → 2.Save. See Memory (P. 20).
(7)
Initial Status of Power On : SHIFT + SETUP. See SETUP (P. 22).
(8)
Internal Cal. Signal : SHIFT + SETUP → 1.CAL Signal. See SETUP (P. 21).
(9)
Option Report : SHIFT + SETUP → 2.Option Report. See SETUP (P. 21).
(10)
Self Diagnose : SHIFT + SETUP → 3~6. LO's status. See SETUP (P. 21~22).
(11)
Change Power Meter Unit : SHIFT + SETUP → 7. Units. See SETUP (P. 22).
(12) Dump the Trace to PC. See Appendex 1 (P. 31).