GW Instek GSP-810 User Manual - Manual (Page 38)

GSP-810 User Manual
36
Display Area
Edit To edit the limit line. See “Limit” function in following.
License To enter the license code.
The others are the same as GSP810try.
Control Panel
There are four divisions of the control functions. They are Basic Function, Marker,
Limit, TG Function, Trace Record and General Function.
Basic Function
Center To set the Center frequency.
Span To set the Span.
REF LVL To set the Reference level.
RBW To set the RBW.
Limit
There are two limit lines that allow to be used in “Upper” and ”Lower” limit needed
application. When installation is completed, there will be a “working” directory is
set under the setup directory. This is also the default directory for demo limit line
saved. Editing and saving a new limit line can also be done in “Edit” function.