Rear panel input/output – GW Instek GSP-930 Quick start guide User Manual
Page 54

GSP-930 Quick Start Guide
52
Power for Option
Connector Type
SMB male
Voltage/Current DC +7V / 500 mA max
With short-circuit
protection
USB Host
Connector Type
A plug
Protocol
Version 2.0
Supports
Full/High/Low speed
MicroSD Socket
Protocol
SD 1.1
Supported Cards microSD, microSDHC
Up to 32GB capacity
Rear Panel Input/Output
Reference Output
Connector Type
BNC female
Output Frequency 10 MHz
Output
Amplitude
3.3V CMOS
Output
Impedance
50 ohm
Reference Input
Connector Type
BNC female
Input Reference
Frequency
10 MHz
Input Amplitude -5 dBm to +10 dBm
Frequency Lock
Range
Within ± 5 ppm of the
input reference frequency
Alarm Output
Connector Type
BNC female; Open-
collector
Trigger Input/ Gated Sweep Input
Connector Type
BNC female
Input Amplitude 3.3V CMOS
Switch
Auto selection by function
LAN TCP/IP Interface
Connector Type
RJ-45
Base
10Base-T; 100Base-Tx; Auto-MDIX
USB Device
Connector Type
B plug
For remote control
only; supports USB
TMC
Protocol
Version 2.0
Supports Full/High
speed