GW Instek PSW-Series Programming & Command manual - Manual (Page 58)

PSW Series Programming Manual
58
Parameter 0 <NR1>Turns blink OFF
OFF Turns blink OFF
1 <NR1> Turns blink ON
ON Turns blink ON
Return parameter 0 <NR1>Turns blink OFF
1 <NR1>Turns blink ON
Example DISP:BLIN 1
Turns blink ON.
Initiate Commands
INITiate[:IMMediate]:NAME ............................................. 58
INITiate[:IMMediate]:NAME
Set
Description The INITiate command starts the TRANsient or
OUTPut trigger.
See the trigger commands on page 75 for usage
details.
Syntax INITiate[:IMMediate]:NAME {TRANsient|OUTPut}
Parameter TRANSient Starts the TRANsient trigger.
OUTPut Starts the OUTPut trigger.
Example INITiate:NAME TRANient
Starts the TRANSient trigger.