GW Instek APS-1102 LabVIEW Driver User Manual - Manual (Page 29)

2.9 STATus Subsystem
2-21
 When the PTR filter is set to 1, WRER is set to 1 when WRCR changes from 0 to 1.
 When the NTR and PTR filters are both set to 1, WRER is set to 1 when WRCR changes.
 When the NTR and PTR filters are both set to 0, changes in WRCR are not propagated to WRER.
<Input>
NTR set
This sets the NTR filter. The default setting is “0”.
PTR set
This sets the PTR filter. The default setting is “0”.
<Output>
Ntransition
When Read = True, outputs the NTR filter contents set for the APS-1102. When Read =
False, “99999” is set.
Ptransition
When Read = True, outputs the PTR filter contents set for the APS-1102. When Read =
False, “99999” is set.