GW Instek PCS-1000 - Manual (Page 35)

OPERATION
35
Setting the USB-UART Baud Rate
Background The baud rate settings are used for remote
control via the USB B port. The USB B
connection uses a virtual COM port to simulate
a serial port (UART) connection. The baud rate
can be set to 115200, 57600, 38400, 19200, 9600,
4800.
See the Communication Interface chapter on
page 42 chapter for details on remote control.
Note
The USB driver needs to be installed for the
baud rate settings to be applicable. See page 48
for details.
Steps 1. Long push the Func key.
The function menu will appear.
2. Use the ◄ Func ► keys to navigate to the
BAUDRATE settings.
3. Use the ▼Select ▲ keys to select a baud rate.
Press the Enter key to set the baud rate.
4. Use the ◄ Func ► keys to change the menu to
the SAVE FUNC SET menu item. Press the
Enter key to save.
Note
To exit without saving, navigate to the EXIT FUNC
SET menu using the ◄ Func ► keys and press the
Enter key to exit without saving any settings.