GW Instek GDM-8261A User manual - Manual (Page 90)

GDM-8261A User Manual
90
1st display Shows A-Zero setting
3. Select the setting using the
Up/Down key.
4. Press the Enter key to confirm
your selection. Press the Exit
key to go back to the default
display.
AUTO
ENTER
/ EXIT SHIFT
Auto-Gain
Background The Auto-Gain (A-GAIN) setting performs auto gain
correction of the internal amplifiers.
Setting Off, On (default=On)
Applicable
Measurement
Mode, Rate and
Speed settings Mode Rate Accuracy Speed Quick Speed
DCV, DCI,
4W/2W,
Resistance S  
M 
F 
Mode Rate
TC, RTD,
Diode,
Cont S These four measurement modes don’t
support either accuracy or quick speed.
M
Panel operation 1. Press the Shift key followed by
the 2nd (Menu) key. Press the
right key twice to choose the
SET ADC menu.
/ EXIT SHIFT
2ND
MENU
TRIG TRIG