GW Instek GDS-2000 training manual - Manual (Page 12)

GDS-2000 Series Training Manual
12
2. Set up the Environment
Here you will learn how to setup measurement environment: select
the menu language, reset GDS-2000, and adjust the display contrast.
1. Press the Utility key → F4 (Language). Press F4 repeatedly to
select the menu language of your choice.
Utility
Language
English
F 4
2. Press the Save/Recall key → F1 (Default Setup) to reset GDS-
2000 front panel. Make sure that Channel1 becomes active (CH1
key LED turns ON) and a horizontal line appears at the center.
Save/Recall
Default
Setup
F 1
3. Go to the next step.
Note:  For a complete list of the default setup contents, see Quick
Reference → Default Settings in GDS-2000 user manual.
 You can also activate the channel manually by pressing
the CH key.
 If the display is too dark or bright, press the Display key
→
F4 (Contrast) and use the VARIABLE knob to adjust
the contrast.
Display
Contrast
F 4
VARIABLE